316L Stainless Steel · PVD
316L Stainless Steel Jewelry Manufacturer
Water-friendly, anti-tarnish pieces in 316L stainless steel with 18K gold plating or PVD — for lines that have to survive daily wear without a plating failure story.
- MOQ 50 for simple pieces, 100 for moulded
- 18K gold plating or PVD
- Water and sweat resistant base
- Not combinable with other materials




Where Steel Wins
Four Lines Built On Steel
Steel is chosen for behaviour under wear, not for cost alone — it holds plating longer than brass because the base does not corrode.
Waterproof everyday lines
Pieces marketed as shower-proof and gym-proof, where the base metal has to tolerate moisture.
Men's and unisex
Heavier chains and beaded bracelets, with matte or brushed finishes and no gendered packaging.
Travel and active retail
Airport, resort and sports retail where tarnish complaints are expensive to handle at distance.
Anti-tarnish fashion ranges
Higher-volume lines that need consistent plating batch to batch rather than the cheapest possible unit.
Real Pieces
Steel Jewelry We Produce
Current 316L constructions with 18K gold plating and PVD.






Indicative Pricing
Steel Cost By Item Type
Steel keeps the unit price low; what moves it is the plating method and the amount of hand assembly.
Stainless steel MOQ is 50 pieces per style for simple constructions and 100 where a custom mould, stone setting or multi-part assembly is involved. Stainless styles cannot be combined with other materials to reach it. Prices are indicative for our current range; final price is confirmed per design, plating and quantity.
How A Steel Order Runs
Plating Method Decides The Price
Two steel pieces can look identical and cost differently depending on whether the colour comes from electroplating or PVD. That decision is made before sampling.
- 1
Design & use case
What the piece has to survive: water, friction, daily wear, or occasional use.
- 2
Plating decision
18K gold electroplating or PVD — with the difference in cost and wear stated plainly.
- 3
Sample
A sample in the agreed plating; sampling is charged and credited against a bulk order that reaches MOQ.
- 4
Approval
Up to three revision rounds, with colour matched to an approved physical reference.
- 5
Production
Produced against the approved sample, batch by batch.
- 6
QC & dispatch
Checked for plating defects and packed; air freight 7–12 days after dispatch.
Start With the Use Case
What Does the Piece Have To Survive?
Tell us whether it is shower-proof, daily-wear or occasional, plus the quantity. We reply with the plating method that fits and an indicative price.
- Plating method recommendation
- MOQ 50–100 and unit price
- Sampling cost and lead time
Stainless Steel — Questions Buyers Ask
Material & plating
Does 316L stainless steel rust?+
316L resists rust and corrosion far better than brass or iron, which is why it is used for pieces worn in water. It is not indestructible: chlorine and abrasive cleaners still shorten its life.
What is the difference between PVD and 18K gold plating?+
PVD deposits a harder, thinner colour layer that resists scratching; electroplating gives a warmer gold colour at lower cost but wears faster at contact points. The choice depends on how the piece is worn.
Is stainless steel jewelry nickel-free?+
316L is low-nickel and is generally tolerated where nickel sensitivity is a concern, but it is not nickel-free. Tell us the market and the claim you intend to make, and we will confirm the specification.
Can steel be engraved?+
Yes, laser engraving is the usual method on steel. It is quoted per design and per character set, with a setup cost where a jig is needed.
Ordering
Why does the stainless steel minimum start at 50 pieces?+
Steel runs on a separate line with its own setup, and the minimum follows the construction: 50 pieces where the piece is a single stamped or cast part, 100 where a custom mould, stone setting or multi-part assembly is involved. Below that the setup cost dominates the unit price.
Can I combine steel styles with pearl or stone styles?+
No. Stainless steel styles cannot be combined with other materials to reach MOQ — the lines and the setup are different.
Can I combine several steel styles together?+
Ask with the specific styles. Where they share the same construction and only the charm or pendant changes, they can usually be quoted together.
Do you charge for samples?+
Yes, per design, credited against a bulk order that reaches the MOQ for that style.
Shipping & compliance
Do you provide test reports?+
Yes, material and plating test reports can be issued with the order.
How is freight charged?+
By actual weight. Air freight is normally 7–12 days door to door after dispatch, with some regions longer.
Can pieces be packed for retail?+
Yes — cards, pouches and boxes are quoted separately and need print-ready artwork.
Send the Use Case
Item type, how hard it is worn, and quantity. We reply with the plating method and indicative pricing.